HELPFUL STUFF FOR LIVING WITH THE VFR
I'm always on the hunt for anything which makes living with and working on these bikes more efficient, better and cheaper. Here's a few things I can supply and sources for stuff that others can.
I offer the items below not for wealth accumulation, but hopefully to assist fellow owners and help to keep this site alive. To purchase, just shoot me a text or email (via the Home Page, or the address below) with a shipping address.
Transfer funds via cash, check, mass quantities of Jameson, Venmo, Zelle, PayPal => joe.nelson@ymail.com
Combined shipping discounts available.
I offer the items below not for wealth accumulation, but hopefully to assist fellow owners and help to keep this site alive. To purchase, just shoot me a text or email (via the Home Page, or the address below) with a shipping address.
Transfer funds via cash, check, mass quantities of Jameson, Venmo, Zelle, PayPal => joe.nelson@ymail.com
Combined shipping discounts available.
Carburetor Sets For Sale:
Rebuilt, Synced, Tuned
1986-93 VFR 700/750
Outright or Exchange Sale
$600/650 including shipping to CONUS
(add $20 if using PayPal "Goods & Services")
I'm offering both Gen 2 and Gen 3 carburetor sets, complete and ready to run — outright or exchange.
•••• SORRY, NO GEN 3 SETS AVAILABLE AT THIS TIME ••••
My carburetor sets are completely disassembled, inspected, ultrasonic cleaned, assembled with fresh seals and any needed parts, leak-tested and synced/tuned on a running engine. Ready to mount and ride.
The $600 (Gen 2) or $650 (Gen 3) cost is for a complete set shipped to you (add $20 if using PayPal "Goods & Services"). If you choose to exchange yours, I will email you a shipping label and refund you $200 upon receiving/inspecting your rebuildable carbs. If I determine yours are not rebuildable, I will offer you $50 minimum for parts value or you can ship them back to yourself. Please inquire for more details.
Rebuilt, Synced, Tuned
1986-93 VFR 700/750
Outright or Exchange Sale
$600/650 including shipping to CONUS
(add $20 if using PayPal "Goods & Services")
I'm offering both Gen 2 and Gen 3 carburetor sets, complete and ready to run — outright or exchange.
•••• SORRY, NO GEN 3 SETS AVAILABLE AT THIS TIME ••••
My carburetor sets are completely disassembled, inspected, ultrasonic cleaned, assembled with fresh seals and any needed parts, leak-tested and synced/tuned on a running engine. Ready to mount and ride.
The $600 (Gen 2) or $650 (Gen 3) cost is for a complete set shipped to you (add $20 if using PayPal "Goods & Services"). If you choose to exchange yours, I will email you a shipping label and refund you $200 upon receiving/inspecting your rebuildable carbs. If I determine yours are not rebuildable, I will offer you $50 minimum for parts value or you can ship them back to yourself. Please inquire for more details.
Rebuild Service: Labor plus parts & shipping
I will also rebuild your carbs for labor plus parts and shipping, please inquire for details.
I will also rebuild your carbs for labor plus parts and shipping, please inquire for details.
Carburetor Rebuild Kit
"The Essentials"
Gen 2, 1986-87 VFR700/750 F/F2
$80 including shipping to CONUS
Combine with Fuel Line Kit below for $100 total
Here's everything I replace when rebuilding a Gen 2 carburetor set. Beyond these items, I reuse the OEM Honda hard parts, i.e., main jets, float valve holders, etc.
This set will allow a complete rebuild, including the critical fuel joint o-rings and upsized low-speed jets, which I install for a general improvement in drivability. These items are the best quality I can source.
NOTE: This kit will also service the 1990-93 VFR, minus the float valves, which I'm no longer able to source separately. If you'd like to order the kit without the float valves, just advise…and subtract $20.
"The Essentials"
Gen 2, 1986-87 VFR700/750 F/F2
$80 including shipping to CONUS
Combine with Fuel Line Kit below for $100 total
Here's everything I replace when rebuilding a Gen 2 carburetor set. Beyond these items, I reuse the OEM Honda hard parts, i.e., main jets, float valve holders, etc.
This set will allow a complete rebuild, including the critical fuel joint o-rings and upsized low-speed jets, which I install for a general improvement in drivability. These items are the best quality I can source.
NOTE: This kit will also service the 1990-93 VFR, minus the float valves, which I'm no longer able to source separately. If you'd like to order the kit without the float valves, just advise…and subtract $20.
Fuel Line Kit
Gen 2, 1986-87 VFR700/750 F/F2
$28 includes shipping to U.S.
- combine with Carb Rebuild Kit above for $100 total
(contact me for shipping elsewhere)
Our 37-year old fuel lines have had their day, and we can now do better against modern fuels. Here is everything you need to replace your old fuel lines and filter from the gas tank to the carburetors.
This kit supplies modern fuel line, a new filter (same size/style as OEM) and new spring clamps. Supplied as shown; correct length lines, assembled and ready to install.
Gen 2, 1986-87 VFR700/750 F/F2
$28 includes shipping to U.S.
- combine with Carb Rebuild Kit above for $100 total
(contact me for shipping elsewhere)
Our 37-year old fuel lines have had their day, and we can now do better against modern fuels. Here is everything you need to replace your old fuel lines and filter from the gas tank to the carburetors.
This kit supplies modern fuel line, a new filter (same size/style as OEM) and new spring clamps. Supplied as shown; correct length lines, assembled and ready to install.
Float Bowl Gaskets
VFR700/750 '86-93 (for '94-97, see note below)
ST1100 '90-01
GL1200 '83-87
Magna '94-03
$10 per four, includes instructions & shipping
(includes international shipping)
Does your garage smell of eau de petrol in the morning?
Does your otherwise well-behaved V4 dribble fuel after storage?
Did a previous owner hand you this mess?
VFR700/750 '86-93 (for '94-97, see note below)
ST1100 '90-01
GL1200 '83-87
Magna '94-03
$10 per four, includes instructions & shipping
(includes international shipping)
Does your garage smell of eau de petrol in the morning?
Does your otherwise well-behaved V4 dribble fuel after storage?
Did a previous owner hand you this mess?
The fix is at hand, my friend. I've sourced VITON o-ring gaskets to stand up to the ethanol-laced stuff they're forcing us to use in places the engineers of thirty years ago never intended. Install these and never fear modern fuels again. Why is VITON better?
NOTE: While these gaskets will fit the '94-97 VFRs, they will require a few dabs of gasket cement or similar to hold in place during assembly.
- Heat tolerance (typically: 400 degrees F max vs. 250 degrees F max for nitrile)
- Compression set
- Permeation
- Resistance to various chemicals
NOTE: While these gaskets will fit the '94-97 VFRs, they will require a few dabs of gasket cement or similar to hold in place during assembly.
Fuel Joint O-rings & Fuel Line Kit
VFR 1986-97
$20 per 4-carb set, includes shipping to U.S.
(add $15 for international shipping)
$6 O-rings only (4), includes shipping (worldwide)
Here's a complete kit to replace the aging o-rings and fuel lines in your VFR's carburetor set, and are absolutely part of a complete carburetor rebuild. The o-rings are VITON to negate the effects of ethanol gas and the fuel lines are high-quality TYGON, in gray. There's also four easy-to-use spring clamps to replace the annoying OEM wire clamps.
VFR 1986-97
$20 per 4-carb set, includes shipping to U.S.
(add $15 for international shipping)
$6 O-rings only (4), includes shipping (worldwide)
Here's a complete kit to replace the aging o-rings and fuel lines in your VFR's carburetor set, and are absolutely part of a complete carburetor rebuild. The o-rings are VITON to negate the effects of ethanol gas and the fuel lines are high-quality TYGON, in gray. There's also four easy-to-use spring clamps to replace the annoying OEM wire clamps.
The VITON o-rings seal the carburetor fuel supply tubes into your carbs. This is insurance against current and future leaks, as the original o-rings will eventually succumb to age and ethanol. The TYGON lines are super flexible and won't kink or deteriorate from the chemicals in modern fuels. This is expensive stuff but it's the only product I've found to work as well as OEM. Two lines of the correct lengths are included, with clamps.
Installation requires separating the carbs from one another, but some patient fiddling will find you with leak-free carbs. I will include an instruction sheet detailing how I do the procedure, and there's a photo tutorial on the "Maintenance" page; Carb Fuel Joint O-ring & Fuel Line Replacement. The process takes me about 40 minutes once the carb set is on the bench.
This kit is for the fuel supply tubes, not the vent tubes, as those are sized differently and are not critical seals. I can also supply the fuel supply tube o-rings alone ($6 shipped, including international), but this is your chance to do the job right with super flexible and highest quality fuel line I can find.
NOTE: The o-rings are sized differently for the 1994-97 models. Advise of your model year.
Installation requires separating the carbs from one another, but some patient fiddling will find you with leak-free carbs. I will include an instruction sheet detailing how I do the procedure, and there's a photo tutorial on the "Maintenance" page; Carb Fuel Joint O-ring & Fuel Line Replacement. The process takes me about 40 minutes once the carb set is on the bench.
This kit is for the fuel supply tubes, not the vent tubes, as those are sized differently and are not critical seals. I can also supply the fuel supply tube o-rings alone ($6 shipped, including international), but this is your chance to do the job right with super flexible and highest quality fuel line I can find.
NOTE: The o-rings are sized differently for the 1994-97 models. Advise of your model year.
Pilot Screw O-ring Set — VF & VFR — VITON Quality
$5 per four, includes shipping
(including international shipping)
Replacement pilot screw VITON o-rings, set of four. I haven't been able to test pilot screws from each model, but these should fit all years and models VF and VFR, '82-97. These are the small-end o-rings.
I also have the large-end o-rings as used on the '86-87 750/700 model (far right in the photo), but curiously not on the identical newer models' pilot screws. This tells me that the large-end o-rings may have been deemed unnecessary, and appear to serve mainly as a dust seal so yours are probably fine. If you need a set of the large-end, just advise. Same price.
$5 per four, includes shipping
(including international shipping)
Replacement pilot screw VITON o-rings, set of four. I haven't been able to test pilot screws from each model, but these should fit all years and models VF and VFR, '82-97. These are the small-end o-rings.
I also have the large-end o-rings as used on the '86-87 750/700 model (far right in the photo), but curiously not on the identical newer models' pilot screws. This tells me that the large-end o-rings may have been deemed unnecessary, and appear to serve mainly as a dust seal so yours are probably fine. If you need a set of the large-end, just advise. Same price.
Pilot Screw Backing Washers — VF & VFR
$5 per four, includes shipping
(including international shipping)
Those pesky little pilot screw washers will slip out of your carbs or fumble from your fingers, never to be found again. I have sourced the exact size stainless replacements. I haven't been able to test pilot screws from each model, but these should fit all years and models VF and VFR, '82-97.
$5 per four, includes shipping
(including international shipping)
Those pesky little pilot screw washers will slip out of your carbs or fumble from your fingers, never to be found again. I have sourced the exact size stainless replacements. I haven't been able to test pilot screws from each model, but these should fit all years and models VF and VFR, '82-97.
Jet Needle Shims — 1986-93, probably others
$4 per four, includes shipping
(includes international shipping)
These may be used as replacement shims for lost or damaged needle shims, or as additional shims for carb tuning. I use them as an additional spacer to effectively lift the main jet needle higher, providing slightly more fuel through the main jet. A poor man's jet kit? Thickness is .023 inches. You will receive four stainless steel shims (additional parts pictured are for illustration only).
$4 per four, includes shipping
(includes international shipping)
These may be used as replacement shims for lost or damaged needle shims, or as additional shims for carb tuning. I use them as an additional spacer to effectively lift the main jet needle higher, providing slightly more fuel through the main jet. A poor man's jet kit? Thickness is .023 inches. You will receive four stainless steel shims (additional parts pictured are for illustration only).
Sight Glass Replacement Lens — Brake & Clutch Master Cylinders
1982-97 VFR, VF500, Hawk GT (NT 650)
$10 per two, includes instructions and shipping
(including international shipping)
When your original plastic sight glass turns an ugly yellow and begins to swell from 30 years of contact with neglected brake fluid, a leak is not far away. And a few undetected drops onto your pretty fuel tank acts as a great paint remover. Fix it now, fix it right. These perfectly-sized glass crystals are extremely strong, always clear and will never age.
Break out the old plastic piece, clean up the mounting area with a Dremel wire brush, wipe with solvent and install the new glass with an appropriate adhesive, let cure for 24 hours. This is a great time to flush your systems or install braided lines.
NOTE: There are two sizes: I will send you both sizes, as there's no reliable way to determine your correct size.
NOTE: these may fit later model VFRs, but I've not been able to verify that. If you want to send me an accurate measurement, I'll be happy to accommodate your order.
There's a photo tutorial on the "Maintenance" page; Sight Glass Replacement.
1982-97 VFR, VF500, Hawk GT (NT 650)
$10 per two, includes instructions and shipping
(including international shipping)
When your original plastic sight glass turns an ugly yellow and begins to swell from 30 years of contact with neglected brake fluid, a leak is not far away. And a few undetected drops onto your pretty fuel tank acts as a great paint remover. Fix it now, fix it right. These perfectly-sized glass crystals are extremely strong, always clear and will never age.
Break out the old plastic piece, clean up the mounting area with a Dremel wire brush, wipe with solvent and install the new glass with an appropriate adhesive, let cure for 24 hours. This is a great time to flush your systems or install braided lines.
NOTE: There are two sizes: I will send you both sizes, as there's no reliable way to determine your correct size.
NOTE: these may fit later model VFRs, but I've not been able to verify that. If you want to send me an accurate measurement, I'll be happy to accommodate your order.
There's a photo tutorial on the "Maintenance" page; Sight Glass Replacement.
Reservoir Replacement Screws — Stainless Steel (Black)
$5 per four
Shipping Note: Shipping is free with additional "packaged" items, otherwise an additional $3 U.S and $15 International. Sorry, this is due to the fact that the screws require packaging as opposed to a flat mailer.
If you're lucky enough to get the soft, neglected, corroded brake & clutch reservoir screws out in one piece, you may want to take the opportunity to switch them out for a better idea. Looks better, works better. Four correctly-sized, stainless, crosshead screws in black.
$5 per four
Shipping Note: Shipping is free with additional "packaged" items, otherwise an additional $3 U.S and $15 International. Sorry, this is due to the fact that the screws require packaging as opposed to a flat mailer.
If you're lucky enough to get the soft, neglected, corroded brake & clutch reservoir screws out in one piece, you may want to take the opportunity to switch them out for a better idea. Looks better, works better. Four correctly-sized, stainless, crosshead screws in black.
Lower Fork Leg Brass Sealing Washers
1983-2009 VF & VFR 700, 750, 800 and many other Honda models
$2 per two, includes shipping
(add $1 for international shipping)
When doing a complete front fork service, these sealing washers are spec'd as replacement items by the factory. This is not a place where you want to risk a leak. These are aftermarket replacements for Honda part number 90544-283-000. You will receive two washers (bolt pictured is for illustration only).
1983-2009 VF & VFR 700, 750, 800 and many other Honda models
$2 per two, includes shipping
(add $1 for international shipping)
When doing a complete front fork service, these sealing washers are spec'd as replacement items by the factory. This is not a place where you want to risk a leak. These are aftermarket replacements for Honda part number 90544-283-000. You will receive two washers (bolt pictured is for illustration only).
"HONDA" Windscreen Decal
For all models using a white Honda screen decal
$5 each or $8 for two, including shipping to anywhere in the world
If your windscreen decal is faded, chipped, missing, discolored or you've replaced the screen with aftermarket, you'll need the correctly sized and perfectly curved replacement. I've had these reproductions made just for our bikes. Die-cut with individual letters.
For all models using a white Honda screen decal
$5 each or $8 for two, including shipping to anywhere in the world
If your windscreen decal is faded, chipped, missing, discolored or you've replaced the screen with aftermarket, you'll need the correctly sized and perfectly curved replacement. I've had these reproductions made just for our bikes. Die-cut with individual letters.
I'm offering the original OEM length of 5 1/2 inches/140mm and also a smaller length if you'd prefer something a little less bold; 4 inches/102mm (OEM length pictured above installed on a 1986-87 VFR).
Please state your length preference when ordering, or get one of each.
Please state your length preference when ordering, or get one of each.
"ENKEI" Wheel Decals, with directional arrows
For all 16, 17, 18 inch wheels
$2 each or $15 for eight, including shipping to anywhere in the world
Add a bit of flair to your wheels, while highlighting our wheel maker, Enkei. Bright red, with appropriate directional arrows (easily deleted, if desired). Curved perfectly to match the wheel curvature. Simple to apply wet or dry, but wetting allows easy corrections to help with positioning. 52mm wide by 12mm high.
Order any number/direction combination or a complete set of eight to fit both wheels.
For all 16, 17, 18 inch wheels
$2 each or $15 for eight, including shipping to anywhere in the world
Add a bit of flair to your wheels, while highlighting our wheel maker, Enkei. Bright red, with appropriate directional arrows (easily deleted, if desired). Curved perfectly to match the wheel curvature. Simple to apply wet or dry, but wetting allows easy corrections to help with positioning. 52mm wide by 12mm high.
Order any number/direction combination or a complete set of eight to fit both wheels.
"V4 Dreams" Decal
$2 each including shipping to anywhere in the world
Proclaim your cool factor with the most sought-after bike sticker in the world.*
I have a small supply of these medium-gray/dark silver decals available. Slap one on your truck, rider mower (I have one on mine!), bike lift, forehead, your mom's car…or your bike!
2.5" x .5" high, die-cut individual letters. That's 63 x 13mm for the rest of you.
* not really
$2 each including shipping to anywhere in the world
Proclaim your cool factor with the most sought-after bike sticker in the world.*
I have a small supply of these medium-gray/dark silver decals available. Slap one on your truck, rider mower (I have one on mine!), bike lift, forehead, your mom's car…or your bike!
2.5" x .5" high, die-cut individual letters. That's 63 x 13mm for the rest of you.
* not really
SOURCES
Here's a few sources for products which have proved helpful over the years.
Here's a few sources for products which have proved helpful over the years.
Suspension Upgrades
Jamie Daugherty at DMr is the go-to guy for personalized front and rear suspension upgrades. He knows VFRs. I've worked with his products — zero issues.
daughertymotorsports.com
———--
RACE TECH supplies quality engineered suspension upgrades front & rear. I've used their products and they work.
racetech.com
Jamie Daugherty at DMr is the go-to guy for personalized front and rear suspension upgrades. He knows VFRs. I've worked with his products — zero issues.
daughertymotorsports.com
———--
RACE TECH supplies quality engineered suspension upgrades front & rear. I've used their products and they work.
racetech.com
Bar Risers by MOTO-CNC
For a simple approach to improved ergonomic comfort, bar risers are a quick and easy solution. MOTO-CNC offers risers for a variety of VFR models, including handlebar adaptor kits.
moto-cnc.com/handlebar-risers/vfr750f-risers
For a simple approach to improved ergonomic comfort, bar risers are a quick and easy solution. MOTO-CNC offers risers for a variety of VFR models, including handlebar adaptor kits.
moto-cnc.com/handlebar-risers/vfr750f-risers
Fender Eliminator for '86-87
Don't want the bulky fender/license bracket look anymore? Rear fender damaged or missing? These lightweight aluminum brackets eliminate the clutter and provide a tucked-in turn signal mounting point. Now you can mount most any turn signal you wish or there's still room for the OEM signals if you want to keep them. I get these from Chris at his eBay store customizedbikeparts. He makes this high quality bracket himself right here in the U.S. of A and stands behind his work. Find it by searching "Universal Katana Fender Eliminator." He also has models without the turn signal tabs. Powder coated aluminum, about $23 shipped.
Don't want the bulky fender/license bracket look anymore? Rear fender damaged or missing? These lightweight aluminum brackets eliminate the clutter and provide a tucked-in turn signal mounting point. Now you can mount most any turn signal you wish or there's still room for the OEM signals if you want to keep them. I get these from Chris at his eBay store customizedbikeparts. He makes this high quality bracket himself right here in the U.S. of A and stands behind his work. Find it by searching "Universal Katana Fender Eliminator." He also has models without the turn signal tabs. Powder coated aluminum, about $23 shipped.
Internet OEM Parts
I like to support my local dealer when the markup isn't too stratospheric. When it is, I rely on https://www.rockymountainatvmc.com — $7 flat-rate shipping, free on orders over $75. OEM parts plus a huge selection of accessories.
I also check in with the boys in Omaha at Dillon Brothers Motorsports, AKA partsfish.com. This option won't be as fast as your dealer, but they're easy to deal with, better prices and you can actually call and talk with Martin if there's a question on your mind. Easy-to-use parts fishe, no charge.
For a good selection of more obscure parts, I always check with cmsnl.com in the Netherlands. Fair prices, fair shipping and sometimes you find that elusive gem you're after.
Another internet source with competitive prices and free shipping on orders over $79 is www.motosport.com
I like to support my local dealer when the markup isn't too stratospheric. When it is, I rely on https://www.rockymountainatvmc.com — $7 flat-rate shipping, free on orders over $75. OEM parts plus a huge selection of accessories.
I also check in with the boys in Omaha at Dillon Brothers Motorsports, AKA partsfish.com. This option won't be as fast as your dealer, but they're easy to deal with, better prices and you can actually call and talk with Martin if there's a question on your mind. Easy-to-use parts fishe, no charge.
For a good selection of more obscure parts, I always check with cmsnl.com in the Netherlands. Fair prices, fair shipping and sometimes you find that elusive gem you're after.
Another internet source with competitive prices and free shipping on orders over $79 is www.motosport.com
Tires
My current tire supplier is Rocky Mountain ATV & M/C. Lowest prices and free shipping on a set. They help with rebates, too!
Also check with AMT; americanmototire.com. Exceptional customer service, good pricing and easy-to-use web site.
My current tire supplier is Rocky Mountain ATV & M/C. Lowest prices and free shipping on a set. They help with rebates, too!
Also check with AMT; americanmototire.com. Exceptional customer service, good pricing and easy-to-use web site.
Batteries
Best price, fast and free shipping? It's batterystuff.com. Two-day shipping, 'cause when you need a battery, you need it now. Super customer service — remember customer service? These folks also supply genuine Yuasa batteries branded under the "Motocross" label.
But be sure to check https://www.rockymountainatvmc.com , as they can often supply Yuasa brand batteries at a competitive price.
Best price, fast and free shipping? It's batterystuff.com. Two-day shipping, 'cause when you need a battery, you need it now. Super customer service — remember customer service? These folks also supply genuine Yuasa batteries branded under the "Motocross" label.
But be sure to check https://www.rockymountainatvmc.com , as they can often supply Yuasa brand batteries at a competitive price.
Suggestions?
Please contact me, via the Home Page, with any and all suggestions for products or sources, helping us all to keep these great bikes on the road.
Please contact me, via the Home Page, with any and all suggestions for products or sources, helping us all to keep these great bikes on the road.
Disclaimer:
I can't be responsible for how these parts are installed or utilized by the end user. I recommend using a qualified technician to work on your machine and determine if these parts or suppliers are suitable for your application.
I can't be responsible for how these parts are installed or utilized by the end user. I recommend using a qualified technician to work on your machine and determine if these parts or suppliers are suitable for your application.