The day prior to the bike show (previous post) it was reassembly time for Project 16.
This project is a 1986 VFR700F which I decided to finish in what was a special-edition color for '86; Pearl Crescent White. I've found the original color impossible to custom match, so after a lengthy search I found a modern Kia color that looks to be a perfect copy. My painter put on two coats of pearl to get just the right tone. I then applied the reproduction decals and a few coats of clear finished the job. Here I have all the pieces ready for installation.
This project is a 1986 VFR700F which I decided to finish in what was a special-edition color for '86; Pearl Crescent White. I've found the original color impossible to custom match, so after a lengthy search I found a modern Kia color that looks to be a perfect copy. My painter put on two coats of pearl to get just the right tone. I then applied the reproduction decals and a few coats of clear finished the job. Here I have all the pieces ready for installation.
Some prep is required before the body parts are ready to bolt on. The fuel tank needs the new OEM petcock installed along with the fuel cap. The headlight and tail light also need to be fitted.
And here I've installed the interior air duct on one of the large mid-fairings and also applied the sound and heat shield. I couldn't source the original foam material used by the factory, so some modern self-stick foam/foil will do the job.
And here I've installed the interior air duct on one of the large mid-fairings and also applied the sound and heat shield. I couldn't source the original foam material used by the factory, so some modern self-stick foam/foil will do the job.
Before & After
This Interceptor is in a very stock configuration with original mufflers and turn signals. I did need to recover the seat and mount a reproduction windscreen. As soon as Patti and I return from a horseback riding trip to Colorado, I'll get some photos and offer Project 16 for sale.
RSS Feed