I recently found myself in need of removing both wheels simultaneously from Project 37, a 1993 VFR750, as I wanted to avoid a second trip to my tire mounting guy. Lacking a center stand, I couldn't figure out how to raise the entire bike while on the lift, but, using two floor jacks, I was able to make it work on the floor. It may look a bit wonky, but is actually very stable. While I was at it, I also removed the forks and triple trees for service.

Here's another approach using a single-sided paddock stand together with a floor jack. I think I could remove the rear wheel in this position but I've never been brave enough to try.

And reader Michael S. sent along this pic of his handy rolling chassis lift. Beginning with a furniture dolly, Michael built up rear supports under the center stand bosses and front risers under a bar passed through the small frame eyelets found on the 2d-gen frames. Both wheels are off the ground giving full access to the front and rear suspension and the entire bike can be rolled around the workspace — nice!

SOLD: $3650

I had been watching this auction with interest as I've noticed an increase in attention to the VF1000F variant of the 1st-gen Interceptor lineup. Always considered the red-headed step-child of the VF series, the "F" model ended up being a one-year effort, quickly superseded by the hi-tech "R", already available in the European market.

But I've always thought that the "F" never got fair recognition for its mission; that of a big-bore version of the VF700/750. With the same great looks, comfortable ergos, straightforward engineering, the panache of a V4 powerplant in a world of air-cooled inline fours...plus the added punch that only more cc's can provide.

This example shows only 10,347 miles but is in need of mechanical sorting resulting from a few years of disuse and deferred maintenance. But the bones are good — original, unrestored, minimal corrosion evident, nice paintwork and good mufflers. I would consider this to be a great candidate for a light sympathetic restoration. Someone got a fun and rewarding project.

Next on the Project 37 list is the front suspension and steering bearing replacement. I begin with fork disassembly and inspection. These forks were found to be in excellent internal condition, which would be expected at only 16K miles, needing only oil seal replacement. Here we see the assemblies freshly disassembled and before cleaning.

(Right) Beginning with the third-generation VF/VFRs our forks advanced to "cartridge-type" fluid damping. What changed is the addition of the flow restricting cartridge (circled). The advantage of a cartridge is that it can be tuned to restrict fluid (fork oil) flow to a lesser or greater degree, allowing fine tuning of damping rates. This is accomplished mainly by the number of wafers stacked internally in the cartridge (a simplified explanation). Instead of being limited to altering the size and number of restrictive holes (arrow) in the damping tube as done with the earlier forks, the addition of the cartridge gave the VFR a step up in suspension sophistication.

Specialists like Race Tech also offer upgraded cartridge kits for the early VFRs, usually referred to as "emulator" valves, along with springs, fork parts…even in-house rebuilding services. So, if you feel that your suspension could use some modernizing, there are options. In our case a careful reassembly with 10-weight fork oil is as far as we'll go with this project.

Here in the northlands, we're enjoying a "cold snap," as it's euphemistically phrased in these parts, so I spent a day at the indoor workspace, tackling the various hydraulic actuators on Project 37. These include the two brake master cylinders, clutch master and clutch slave along with their associated assemblies. The neglected clutch fluid on this bike meant extra cleaning of those components plus a new sight glass, but everything went together well. I always break these assemblies down to their individual pieces, clean, inspect, polish, etc., and reassemble with fresh rebuild kits from K&L. The right-side foot brake assembly in particular is a lot of detail, but you're rewarded with a smooth operating, good-looking part.
​Next, fork assembly and mounting.

With Project 37's body panels away for painting, I'm tackling the brake systems. This bike will require a full rebuild, including all three calipers, brake master cylinders plus the clutch hydraulic components.

Jeff, the owner, has chosen to go with complete caliper rebuild kits from Brakecrafters. These were sourced directly from the company via their eBay store and cost about $60 per caliper.

What: 1985 VF1000R Interceptor
Where: Elkhart Lake, WI
Why: A striking example of an iconic model​
Price: Bidding at $4050

UPDATE: Sold for $11,000, then relisted for $12,500 BIN or make offer.
The VF1000R needs little introduction. Built and styled for European endurance racing, the "R" was offered in the U.S. market for 1985-86 and is a Honda collector's staple.

This example shows 27,569 miles and is offered from Throttlestop's collection. The photos show an original condition bike with a near-perfect paint presentation — I suspect it must have had a quality repaint at some point. They state that the mufflers are original, but they look like period slip-ons to me, possibly Cobra brand. The eBay listing has lots of hi-res photos and the bike claims to have been recently serviced. There's also a short running video included in the listing. It looks like a nice one. The listing ends Monday, Feb. 7.

Throttlestop is a collector vehicle seller, repair/restoration and museum facility, located adjacent to the beautiful and storied Road America race course in the rolling hills of the Kettle Moraine State Forest in Elkhart Lake, Wisconsin. The museum is open to the public (fee applies) and Throttlestop hosts a cars & coffee type event during the summer months.

After many hours of cleaning, repairing and sanding, the 18 individual pieces from Project 37 are finally ready to be delivered to the painter. Fortunately, the wheels cleaned nicely, again with hours of detailed labor, but being able to mount the bike's original wheels is a good thing. I have a reproduction decal set on hand, which I will apply to the fresh color and then back to the painter for clear coat. We have settled on a Chrysler pearl paint code, which we will tweak for the best match to the original Pearl Crystal White.  Steve at Steve Nick Customs, Woodstock, IL, is the paint artist for this project.

The 2022 Mecum Las Vegas auctions concluded this past weekend. I had hoped to be there with my 1112-mile 1986 VFR700 but a smart buyer grabbed it from me last Fall, so I was left as an internet spectator. Here's the results listed for the various V4 models crossing the block this year.

1986 VFR750F
Sold: $7700
This RC24 shows 21,371 miles and presents well. Mecum's typically uninformative description states simply, "running condition." The bike appears to be in mostly original condition with damage-free cosmetics, period correct Kerker slip-ons and Fox shock. The passenger seat cowl is present but the windscreen molding is missing. An above average example with a bit less than average miles. The selling price indicates a general rise in second-gen values — and it's about time.

1984 VF1000 F2
Sold: $2420
The auction listing is a little confusing on this Euro-spec VF1000. It's listed as an '84 but the description states that the fully-faired F2 was introduced after the '85 model year. In any case, this is a unique take on the big-block VF in the U.S. and sports the extra fairings, a second radiator and twin headlights. This example looks to be in average condition with 41,842 miles and an aftermarket seat.

2001 Magna 750 (VF750C)
Sold: $2200
This V4 power cruiser stayed in Honda's lineup until 2003 and featured an internally-modified 750cc V4 tuned for mid-range power with 5-speed transmission. This example shows beautifully with only 8043 miles on the odometer. It's selling price seems to indicate the general lack of interest in the mid-displacement cruiser market.

1985 VF500F
Sold: $3300
This mini-'ceptor is represented as an original survivor and certainly shows the appropriate patina, all Armor-All-ed up for the auction. Showing 10,530 miles, I would call this bike an average example, and the seller should be very pleased with the sale price.

1992 VFR400 (NC30)
Sold: $13,750
Here's a beautiful example of the final-year VFR400, cleverly coded by Honda as the NC30 to channel it's famous sibling, the RC30. This model was never offered in the U.S. market but have become a desirable (and now legal) import for collectors and lovers of small displacement point & shoot sport bikes. This one shows 11,657 miles and proudly displays its classic 90's livery. Very nice.

1988 VF1000 FE
Sold: $5170
This Euro-spec VF1000 is designated "FE" and is a lovely survivor despite its 64,468 kilometers. There's some expected patina including some left-side muffler rash and the mirrors are not original to the model. This is a very unique bike here in the U.S., and a pretty cool alternative to the over-priced and less-friendly "R" model.

1982 V45 Sabre (VF750S)
Sold: $1980
This may be the buy of the weekend — a first-year V4 Sabre in very original condition. No word on the miles (or anything else) but this appears to be a well-preserved example. Aluminum corrosion is an issue with the early VFs, but this one doesn't look too bad, and the irreplaceable mufflers are intact. A lot of motorbike for under $2000.

1987 VFR400 (NC24)
Sold: $7700
The NC24 is the second generation of the VFR400 series ('87-88) and introduced the 8-spoke rear wheel and single-sided Pro-Arm swingarm to the model. No mileage listed, but this example is exquisite in one of the three color schemes available this model year. Well bought and well sold.

1982 V45 Magna (VF750C)
Sold: $2750
Another first-year example of the V4 lineup, the Magna was Honda's response to the Japanese cruiser trend of the 80's. This example is mostly original, is all shined up and shows 18,580 miles with muffler rash on both sides. These are not sought-after models and I think the seller should be pleased.

1985 VF1000R
Sold: $12,100
The "R" model VF1000 was sold in the U.S. in 1985-86 but introduced in Europe in '84. A complete redesign of the "F" model, the "R" brought gear-drive cams and many performance upgrades. It was also 85 pounds heavier and was less comfortable, a nod toward its intention as a homologation bike for endurance racing, which never materialized. Still, the "R" remains a desirable classic, and there's no denying the punch delivered by the big-block V4. This bike indicates 27,900 miles and is said to be "highly original." If that's in fact the case, it's an exceptional example and the selling price reflects it.

1984 VF1000F
Sold: $7700
Wow, what a beautiful example of the single-year VF1000F. Belying its 38,892 miles, this example sparkles in its classic red/white/blue livery. Looking over the photos, I have to believe this one has had a cosmetic restoration. The listing also states that the engine was rebuilt in 2017. The selling price is the highest I've ever seen for the model, and hopefully, it signals an uptick in value for the traditionally underrated "F" bikes.

1984 V65 Sabre (VF1100S)
Sold: $1870
Another great buy, this big-block V65 is represented as original and unrestored. These bikes were stoplight brutes, could smoke just about any comers and were direct competitors to Yamaha's V-Max. Available only in 1984 and '85 with its trendy square headlight and long fork styled for a chopper-esque look. This one shows 32,023 miles and is going to bring back some memories for very little money. 

As I progress through the refurbishment of Project 37, a 1993 VFR750, one of the items at the top of the checklist is a valve clearance check and adjustment. Beginning in 1990, the VFR's valve adjustment is accomplished via the "shim-under-bucket" arrangement whereby replaceable shims of varying thickness are exchanged to achieve the recommended clearance, also referred to as "lash." This design provides a very positive mechanical setting which is able to survive high-RPM operations without the threat of "spitting" out a shim as can happen with a "shim-over-bucket" arrangement. Honda must have thought that our high-performance, high-revving engines deserved this design, though interestingly, the earlier generation VF/VFRs seemed to have gotten by with the simpler screw & locknut approach. In fairness, those earlier systems required old-fashioned rocker arms for valve actuation which are more complex and heavier, adding reciprocating mass and, likely, high RPM flexing. But, that earlier design makes our life easier when adjustment time comes about.

In any case, owners of 1990+ machines will need to set aside more garage time (or expect to pay a shop more) in the event their valves are in need of clearance adjustments, which likely leads to this task being put off or outright ignored as part of a normal maintenance regimen. Of course, that's understandable when an owner realizes that, in order to replace a shim, the appropriate camshaft needs to be removed from the cylinder head…and there's four of 'em. So, if you're confident in your wrench-turning abilities, here's a video showing the steps involved in accessing the area for the clearance checks and removing/installing the cams, if necessary.

In this case, all eight valves of the rear cylinders required adjustment along with three of the front intakes and none of the front exhaust. So, three of the four cams required removal.

The second video shows the math exercise required to select the correct replacement shims. I wish I knew how to make math interesting but, alas, I don't.

NOTE: Once I gained access to the valve covers this entire operation took me about 2.5 hours of labor plus the better part of a week waiting for my local dealer to provide the three shims I didn't have on hand. There should be no additional parts needed beyond the required shims, though this is a perfect opportunity to replace the spark plugs. As noted in the shims video, the Haynes service manual is the more thorough guide for this operation.